ATCOM AT-320 H323 User Manual page 23

AT-320 H323 Phone User Manual (V1.39)
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP phone is under setting mode, and then you can set
the AT-320 IP phone by using the telnet commands.
AT-320 Telnet Commands Explanation
AT-320 Telnet Commands
Command
?
get
set
store
load
exit
write
ping
ftp
Detail description of AT-320 Telnet commands
?
Command
Syntax description: No optional parameter
Usage: Type command name and parameters following P:\> . Be used as the
keyword to supply keyword and parameters of the relevant commands.
Relevant usage: None
Supply command name and parameters
Display basic parameters of the AT-320 IP phone
Set parameters of the AT-320 IP phone
Save current settings to designated position
Load designated settings to current position
Exit from the setting mode without saving the configuration
Exit with saving all configurations and restart AT-320
Ping other net parameter
The phone connects to FTP server and then get the files
Function
23