Nilfisk-Advance SW8000 Service Manual page 32

Service Manual – SW8000
Hopper Up Indicator (M): Illuminates when the hopper mechanism is not in the
lowered position.
Hopper Over-temp Indicator (N): This lamp illuminates if the hopper temperature
exceeds 140˚F (60˚C), due to ingestion of combustible materials or embers.
Open Dump Door Switch (O): Opens the dump door for emptying the hopper.
Close Dump Door Switch (P): Closes the dump door after emptying the hopper.
Lower Hopper Switch (Q): Lowers the hopper from the raised position after emptying
the hopper.
Raise Hopper Switch (R): Raises the hopper for emptying.
Main Controller Fault Code Light (S): Flashes out the fault code for the controller.
Refer to Main Controller Error
error codes.
Codes described on page 36 for a listing of the specific
Control System 32
M
N
O
P
Q
R
S