Troubleshooting - Elite Miracle-One Instruction Manual

If the gate is not moving in any direction be sure to check all of the LED displays on the control board. If the board
power or charging power LEDs are on, change the corresponding fuse on the right side of the board. If the motor
will not work, and all LED's on the board are ok, check the fuse on the left side of the board and replace if
necessary.
15 Amps
Caution:
Replace the fuses only with specified rating (Supplied by Elite Access).
8 Amps
T R O U B L E S H O O T I N G
Check the Fuses
Master / Slave
MAGLOCK
Single
MAGLOCK ALARM
STOP BY
POSITIVE
STOP
30
MASTER SLAVE
SYSTEM ON
ALARM
REVERSE
SENSOR
ALARM
SENSOR
OPEN OUT
OPEN IN
OFF ON
POS STOP POS STOP
CLOSE DLY CLOSE DLY
ON OFF
OFF ON
60 3
TIMER
POWER
CHARGE OK
BATTTERY LOW
REPLACE FUSE
WHEN LED IS ON
CENTRAL CONTROL
STRIKE SAFETY RADIO CENTER
OPEN LOOP REC LOOP
SYSTEM
ON
REVERSE
SENSOR
ALARM
SENSOR
OPEN OPEN
INSIDE OUTSIDE
REPLACE FUSE
WHEN LED IS ON
NO YES
ON OFF
60 3
POWER
TIMER
CHARGE OK
BAT LOW
CENTRAL CONTROL
STRIKE SAFETY RADIO CENTER
OPEN LOOP REC LOOP
ACCESS SYSTEMS INC ACCESS SYSTEMS INC
MADE IN USA
Change Fuse
REPLACE FUSE
WHEN LED IS ON
3 Amps 1.5 Amps
Change Fuse
REPLACE FUSE
WHEN LED IS ON
2 Amps 1.5 Amps