U L L I S T I N G S - Elite Miracle-One Instruction Manual

U L U L U L L I S T I N G S L I S T I N G S L I S T I N G S
Installation Instructions Regarding the Gate Operator
A) Install the gate operator only when:
1. The operator is appropriate for the construction and the usage Class of the gate.
2. All openings of a horizontal slide gate are guarded or screened from the bottom of the
gate to a minimum of 4 feet (1.2 m) above the ground to prevent a 2 1/4inch (57.15 mm)
diameter sphere from passing through the openings anywhere in the gate, and in that
portion of the adjacent fence that the gate covers in the open position.
3. All exposed pinch points are eliminated or guarded, and
4. Guarding is supplied for exposed rollers.
B) The operator is intended for installation only on gates used for vehicles. Pedestrians must be
supplied with a separate access opening.
C) The gate must be installed in a location so that enough clearance is supplied between the gate
and adjacent structures when opening and closing to reduce the risk of entrapment. Swinging
gates shall not open into public access areas.
D) The gate must be properly installed and work freely in both directions prior to the installation of
the gate operator.
E) Controls must be far enough from the gate so that the user is prevented from coming in contact
with the gate while operating the controls. Controls intended to be used to reset an operator after
2 sequential activations of the entrapment protection device or devices must be located in the line
of sight of the gate outdoor or easily accessible controls shall have a security feature to prevent
unauthorized use.
All warning signs and placards must be installed where visible in the area of the gate.
F)
A N D A N D A N D I N S T R U C T I O N S I N S T R U C T I O N S I N S T R U C T I O N S
2