Registering Or Editing Destinations To Be Temporarily Used; Temporary One-Touch - Develop ineo+ 353 User Manual

Setup items by operation
Item
Background Removal
Scan Size
Application Setting
E-mail Notification
Timer TX
Password TX
F-Code
Original Direction
2-Sided Binding Direc-
tion
Special Original
Book Scan
Erase
Compose
(Date/Time)
Compose
(Page)
Compose
(Header/Footer)
Compose
(Stamp)
Stamp Combine Method
Limiting Access to Desti-
nations
1.48.4

Registering or editing destinations to be temporarily used

Register destinations to be temporarily used or change temporarily used destination settings.
!
Detail
If "Manual Destination Input" is specified to "Allow", "Temporary One-Touch" is displayed. Specify
settings for "Manual Destination Input" from the control panel.

Temporary One-Touch

In Administrator mode of Web Connection, select the Store Address tab - "Temporary One-Touch".
The settings are the same as the program destination settings. For "Temporary One-Touch", the settings for
"Limiting Access to Destinations" are not displayed. For details on settings for "Temporary One-Touch", refer
to "Registering or editing a program destination" on page
ineo+ 353/253/203
Definition
Adjust the density of the background.
Specify the original size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is
selected, specify the height and width.
Click the [Display] button, and then specify settings for the functions that are displayed.
Specify whether to send notification of scan data URL. Specify the notification address
for "Address". To select a destination from the list, click [Search from List].
Specify whether to perform timer communication. If yes, enter the transmission time.
Specify whether to send the password. If yes, enter the password.
Specify whether to send the password using F code. If "Enable" is selected, type in the
SUB address and password.
Specify the original orientation.
Specify the binding orientation of the original.
Specify the original in a different size.
Specify whether to perform book scan.
Specify whether to perform frame erase.
Specify whether to print the date/time.
If yes, specify settings for "Date Type", "Time Type", "Print Position", "Fine-Tune", "Color"
"Pages", and "Size".
Specify whether to print page numbers.
If yes, specify settings for "Page Number", "Chapter", "Print Position", "Fine-Tune",
"Color", and "Size".
Specify whether to print a header/footer.
If yes, specify the registration number of the header/footer. To check the registered head-
er/footer, click [Confirm Registered Contents].
Specify whether to print the stamp.
If yes, specify settings for "Preset Stamp" or "Registered Stamp", "Print Position", "Fine-
Tune", "Color", "Pages", and "Size". To check the registered stamp, click [Confirm Reg-
istered Contents]. To use the registered stamp function, stamps must be registered from
the control panel in advance.
Specify the stamp composition method.
Click [Display], and then specify the group that is allowed to access a destination and ref-
erence allowed level.
1-160.
1
1-169