Selecting A Start Point Using The Time Code 1 - Teac PL-D2200 Owner's Manual

DVD
Number buttons
You can search by inputting the time code.
The time code corresponds to the approximate actual playing
time. For example, to search for a scene 2 hours 30 minutes 20
seconds past the beginning, key in 02:30:20.
Notes
< This function is not available for MP3.
< You may not be able to do this function depending on the DVD
disc.
DVD
Title and Chapter Select
1 Press the GO TO button.
The following menu appears on the TV screen.
2
Use the h or G button to select title number or chapter
number.
Use the number buttons (0~9) to input the title or chapter
number you want.
3
Press ENTER to play your selection.
24
http://www.bjjdwx.com/forum.php
79ÍøÂç http://www.79wl.com

Selecting a Start Point Using the Time Code 1

2
3
1
2
1
Time Select
1 Press the GO TO button twice to enter time menu shown as
below.
2 Use the number buttons (0~9) to input the time code you want.
For example, key in 0, 1, 2, 3, 4, 5.
3 Press ENTER to start playing from the point.
Notes
< If the title number, chapter number or time code you input
does not exist in the disc, the system will not execute your
selection and the selecting menu will exit.
< The selecting menu will time out for a few seconds if you do
not input valid number.
3