Audio Channels Selection; Tuner 1 - Teac PL-D2200 Owner's Manual

DVD/VCD/CD

Audio Channels Selection

This function are arranged mostly for supporting Karaoke.
While you are playing a disc with different channels recorded,
press the AUDIO button repeatedly to select the following audio
modes.
DVD
KARAOKE DVD
VCD
CD
Notes
< Depending on the disc, you may not get the above function(s).
< The function of audio channel selection is not available for
MP3 discs.
http://www.bjjdwx.com/forum.php
79ÍøÂç http://www.79wl.com
AUDIO 1
AUDIO 2
AUDIO 1 VOCAL
AUDIO 2 VOCAL
MIX VOCAL
NO VOCAL
LEFT VOCAL
RIGHT VOCAL
BOTH VOCAL
LEFT VOCAL
RIGHT VOCAL
MONO LEFT
MONO RIGHT
STEREO
MONO LEFT
MONO RIGHT
STEREO

Tuner 1

Number buttons
5
4 6
Presetting Radio Stations
You can preset up to 40 stations for FM and AM.
1 Press the TUNER button to select Tuner function.
2 In TUNER mode, press the TUNER button repeatedly to select
desired FM or AM band.
3 Press and hold the TUNING (‡/°) buttons until the
frequency indicator starts to change automatically, then
release the button.
Scanning stops when the system tunes in a station.
4
Press the MEMORY button.
A preset number "P01" appears and "PROG" blinks on the
front panel display.
5 Press the PRESET (‡/°) buttons on the remote control to
select a preset number you want.
You can use the number buttons (0~9/+10) on the remote
control to key in a preset number directly.
6 Press the MEMORY button again to store the station.
If you do not press this button in 5 seconds or you press any
other buttons, the station won't be stored in the system.
The preset number and "PROG" indicator disappear.
7
Repeat Step 2 to 6 to store other stations.
To tune in a station with a weak signal
Press the TUNING (‡/°) buttons repeatedly in Step 3 to tune
in the station manually.
1 2
3
31