Angle Mark Setting; Center Delay Setting; Rear Delay Setting; Screen Saver Setting - Teac PL-D2200 Owner's Manual

Angle Mark Setting

Selects whether the angle mark
not when a multi-angles scene is being played.
ON
appears on the TV screen.
OFF
does not appear.
TURN ANGLE MARK ON
Note
< You can change the angles using the ANGLE button. For the
details, see page 21.
OSD LANG (Selecting the Language for OSD)
See page 12.

Screen Saver Setting

Turns on or off the screen saver.
If you turn on the screen saver, the screen saver image appears
when you leave the system in pause or stop mode for 1 minutes.
The screen saver is useful to prevent your display from becoming
damaged.
ON
Turns on the screen saver.
OFF
Turns off the screen saver.
SCREEN SAVER OFF
28
http://www.bjjdwx.com/forum.php
79ÍøÂç http://www.79wl.com
Settings & Adjustments 2
appears on the TV screen or
- - GENERAL PAGE - -
TV DISPLAY
TV TYPE
VIDEO OUTPUT
ANGLE MARK ON
OSD LANG OFF
SCR SAVER
MAIN PAGE
ON OFF
- - GENERAL PAGE - -
TV DISPLAY
TV TYPE
VIDEO OUTPUT
ANGLE MARK
OSD LANG
SCR SAVER ON
OFF
MAIN PAGE

Center Delay Setting

Selects the center delay time from off, 1ms to 4ms, or 5ms.
If the listening position is closer to the center speaker than to the
front speaker, you can set the center delay time to improve the
sound field effect. You'd better set this item together with other
speaker settings.
- - SPEAKER SETUP PAGE - -
CNTR DELAY
REAR DELAY
TEST TONE
MAIN PAGE
CENTER DELAY OFF

Rear Delay Setting

Selects the rear delay time from off, 3ms to 12ms, or 15ms.
If the listening position is closer to the rear speaker than to the
front speaker, you can set the rear delay time to improve the
sound field effect. You'd better set this item together with other
speaker settings.
- - SPEAKER SETUP PAGE - -
CNTR DELAY
REAR DELAY
TEST TONE
MAIN PAGE
SURROUND DELAY OFF
Why Delay Time is Needed
It is ideal that the distances are equal between the listner and the
5 speakers so that the sound from each speaker may reach the
listner at the same time.
If the distance of each speaker is not equal, the center speaker
and surround speakers may be set to delay time to place them in
the ideal virtual position.
Setting delay time when the center or surround speakers are
further away than the front speakers will not correct any sound
problems.
For every increase of 1ms in delay time the virtual distance of the
speakers is increased by approximately 30 cm. Using this
standard you can use the delay time setting to correct the
difference in the distance of the front speaker.
The delay time settings may be set for both the center speaker
and the surround speakers.
CENTER
FRONT
(L)
SURROUND
(SL)
5MS
3MS
1MS
OFF
15MS
9MS
3MS
OFF
TV
FRONT
(R)
SURROUND
(SR)