Program Play - Teac PL-D2200 Owner's Manual

DVD/VCD/CD
Repeat Playback 2
Repeat Playback of a Designated Section (A-B
Repeat)
1 Start playback and designate the point at which the A-B
repeat should start (point A) by pressing the A-B button.
"A TO B SET A" appears on the screen.
2 When the point at which repeat playback should end (point B)
is reached, press the A-B button again.
"A TO B SET B" appears on the screen, and "A-B" lights on
the front panel display.
The designated section will be played repeatedly.
< When playing a CD/VCD, the point A and B should be selected
from the same track.
< When playing a DVD, the point A and B should be selected
from the same title.
< There should be more than 2 seconds between A and B.
< If one of the following buttons is pressed, A-B repeat mode will
be cancelled:
STOP (VCD, CD), STOP in the stop mode (DVD)
., /, A-B, MENU/PBC (VCD), OPEN/CLOSE, POWER,
FUNCTION
http://www.bjjdwx.com/forum.php
79ÍøÂç http://www.79wl.com
VCD/CD
You can play the contents of the disc in the order you want by
arranging the order of the tracks on the disc and create your own
program. Up to 99 tracks can be programmed.
Note
< This function is not available for DVD and MP3 disc.
1
In stop mode, press the PROGRAM button to enter program
registration mode.
The "PROGRAM" appears on the TV screen and "PROG"
blinks on the front panel display.
2
Use the number buttons (0~9/+10) to key in the track numbers
in the order you want. If the track number is more than 10, use
+10 button.
If the programmed numbers have reached the maximum limit
(P99:--) and you key in track number again, the "FULL"
indicator will appear on the TV screen and the front panel
display.
3 If you have completed the above program registration as your
desire, press the G/J button to start the program play.
Note
< If you press the STOP button or other foreign buttons in the
program registration mode, the system will interrupt and exit
the program setting.
< The program remains even after the program play ends. When
you press G/J, you can play the same program again.
< You can do repeat play of the programmed tracks.
During program play, press the REPEAT button.
< If one of the following buttons is pressed, the program will be
cleared:
POWER, STOP button in the stop mode

Program Play

2
REPEAT 1
STOP
3
Programmed numbers Track number
23