7526
NumPad Job Assist
This setting determines whether or not a user can configure and initiate a job using the operator panel buttons.
When this is set to On, a user can choose a function, such as copy, fax, or so forth, and then enter specific
values for a limited number of settings and initiate the job with a series of key presses. When turned to Off, the
feature is not available.
To change the Numpad Job Assist value:
1.
Touch NumPad Job Assist on the Config Menu.
2.
Touch the left arrow or the right arrow to toggle between On and Off.
3.
Touch Submit.
Submitting changes... is displayed.
You are automatically returned to the Configuration main menu.
Min Copy Memory
This setting determines how much DRAM memory the MFP will allot to a priority queue. Amounts are 25, 35, 50,
80, or 100MB. The default is 80MB. The regular queue is interrupted for copy jobs in the priority queue.
To change the Min Copy Memory value:
1.
Touch Min Copy Memory on the Config Menu.
2.
Touch the left arrow or the right arrow to change between 25 MB, 35 MB, 50 MB, 80 MB, and 100 MB.
3.
Touch Submit.
Submitting changes... is displayed.
You are automatically returned to the Configuration main menu.
Format Fax Storage
This procedure formats fax storage. When executed, this operation ONLY deletes faxes that are stored in the
location identified by the value of the Fax Storage Location setting.
1.
Touch Format Fax Storage in the Config Menu.
2.
Touch either Yes or No
If Yes is selected, Formatting Fax Flash DO NOT POWER OFF is displayed. Then you are automatically
•
returned to the Configuration main menu.
•
If No is selected, you are returned to the Configuration main menu.
3-36
Service Manual
Contents will be lost. Continue?
Yes
No