Gateway E-100M Technical Reference Manual page 69

www.mpccorp.com
10
Hold the replacement module at a 30-degree angle and
slide it into the empty memory slot. This module is keyed
so it can only be inserted in one direction. If the module
does not fit, make sure that the notch in the module lines
up with the tab in the memory bay.
Important
Use only memory modules designed for your MPC notebook.
11
Gently push the module down until it clicks in place.
12
Replace the memory bay cover, then tighten the captive
screw.
13
Insert the battery, then turn your notebook over.
14
Connect to the optional port replicator.
-OR-
Connect the power adapter, modem cable, and network
cable.
15
Reconnect all peripheral devices and replace any
PC cards.
63