The Main Menu is the starting point for accessing all DHD Controller functions.
(You must enter a passcode to access the Calibration and Service menus.)
From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (
active source.
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER. Select the appropriate aspect ratio for your
screen size and the type of program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a "
selected.
Note that some aspect ratios are unavailable and/or not useful with certain types of
source material. The optimal setting depends on a number of factors, such as:
• The aspect ratio of the source material, as broadcast or encoded on the playback
medium.
• The "display type" (16:9 or 4:3) and output resolution settings at the source
component. Most modern DVD/BD players and set-top boxes have such controls.
• Viewer preference (original aspect ratio with "black bars," or a full-screen presentation
with some distortion or cropping).
Note
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
Downloaded From projector-manual.com Runco Manuals
) to its left; in this example, Composite is the
The aspect ratio selection is automatically saved for each input and
resolution.
" to its left; in this example, 16:9 is
53
Operation
Main Menu
Runco Video
Input Source
Aspect Ratio
Picture
Input Position
Memory Presets
Sleep Timer
Information
Calibration
Service
Input Source
Input Source
Composite 1
Composite 2
Composite 3
Component
HD 1
HD 2
SCART
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Aspect Ratio
Aspect Ratio
16:9
4:3
Letterbox
VirtualWide
Cinema
Virtual Cinema
Native