Main Menu; Source Select; Picture Adjust - Runco RS-900 Owner's Operating Manual

Operation

Main Menu

RS-900

Source Select

Picture Adjust

Aspect Ratio
Installation
Information
Setup
ISF
Source Select
Source
➨
Video
S-Video
Component 1
Component 2
HDMI 1
HDMI 2
RGB HD
Picture Adjust
Picture Adjust
Picture Memory Custom 1
Copy Settings
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Reset to Defaults
➤
The Main Menu is the starting point for accessing all projector functions.
(The Set Up and ISF Calibration menus are hidden and not accessible until you enter a
passcode.)
➤
Choose Source Select from the Main Menu to switch video sources.
The active source is indicated by an arrow to its left; in this example, Video is the active
source. To select a different source, use the
ENTER.
➤
Use the controls in the Picture Adjust menu to calibrate your RS-900 for optimum picture
quality. To access the Picture Adjust menu, press MENU, highlight Picture Adjust and
press ENTER.
To adjust a setting, use the
>
or button to change the setting. When finished, press EXIT.
50
The RS-900 has been designed to incorporate setup and calibration standards
50
established by the Imaging Science Foundation (ISF). The ISF has developed carefully
50
crafted, industry-recognized standards for optimal video performance and has
0
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
5
recommends that setup and calibration be performed by an ISF certified installation
6500
technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately.
Although it may be possible to obtain satisfactory picture quality using the naked eye and
regular program material, Runco recommends using the following calibration tools for best
results:
• External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test
DVD or equivalent.
• A blue filter (provided with many test DVDs), for color level and tint adjustments.
Connect your test pattern source to the input that you are calibrating and proceed as
follows. Perform the adjustments in the order listed here.
or
or button to highlight it and press ENTER. Use the
48
button to highlight it and press
Runco RS-900 Owner's Operating Manual