Runco Signature Cinema SC-50d Series Installation & Operation Manual
  1. Manuals
  2. Brands
  3. Runco Manuals
  4. Projector
  5. SC-50d Series
  6. Installation & operation manual

Runco Signature Cinema SC-50d Series Installation & Operation Manual

Full-hd private cinema projector and digital high definition (dhd) controller/processor
Hide thumbs Also See for Signature Cinema SC-50d Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual
I
/ O
M
N S T A L L A T I O N
P E R A T I O N
A N U A L
SC-50d Series
SC-60d Series
Full-HD Private Cinema Projector and
Digital High Definition (DHD) Controller/Processor
Downloaded From projector-manual.com Runco Manuals

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Signature Cinema SC-50d Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Runco Signature Cinema SC-50d Series

Summary of Contents for Runco Signature Cinema SC-50d Series

  • Page 1 N S T A L L A T I O N P E R A T I O N A N U A L SC-50d Series SC-60d Series Full-HD Private Cinema Projector and Digital High Definition (DHD) Controller/Processor Downloaded From projector-manual.com Runco Manuals...
  • Page 2 Downloaded From projector-manual.com Runco Manuals...

  • Page 3: Runcocare™ Standard Two Year Limited Warranty

    1. Runco may update this list of products excluded from this warranty from time to time at Runco’s sole discretion, but updates to the list of covered products will not apply on a retroactive basis.
  • Page 4 3. Runco Technical Support staff will attempt to correct any minor issues that may be causing the problem. If Runco is unable to resolve the problem through troubleshooting, a Return Material Authorization (RMA) number will be issued for the exchange of the defective product if it is determined that the claim was made within the coverage period of the Standard Limited Warranty.
  • Page 5 Runco model size. If sub pixels have been identified as unacceptable by Runco the LCD will be deemed faulty and will be replaced if reported within the warranty period.
  • Page 6 Runco. The trademarks reproduced in this Runco Owner’s Manual and used on the Runco Products are either owned by Runco or are licensed by Runco. You may not reproduce or use the trademarks without the prior written consent of Runco.

  • Page 7: Important Safety Instructions

    Important Safety Instructions Thank you for your purchase of this quality Runco video product! For the best performance, please read this manual carefully as it is your guide through the menus and operation. WARNING This symbol is intended to alert the user to the presence of CAUTION uninsulated “dangerous voltage”...

  • Page 8: Compliance Information

    Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety; EN 60950 “Safety of information technology equipment, including electrical business equipment” The Technical Construction file required by this Directive is maintained at the corporate headquarters of Runco International, LLC, located at 1195 NW Compton Drive, Beaverton, OR 97006-1992.
  • Page 9 This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 10 Notes: Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 11: Table Of Contents

    SC-50d/SC-60d Remote Control Units ..............11 DHD Controller/SC-50d/SC-60d Remote Control Unit ..........11 Setup Remote Control ..................14 3. Installation .......................15 Remote Control ......................15 Notes on Batteries ....................15 Notes on Remote Control Operation ..............16 Quick Setup .......................16 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 12 Attach Lens Mounting Assembly to Lens Motor Carriage Plate ......46 Configure Lens Motor Trigger (CineWide with AutoScope) ........47 Adjust the Anamorphic Lens .................47 Verify Proper Image Alignment with Anamorphic Lens ..........50 Working With the Lamp ....................50 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 13 Using HDMI CEC Messages ..................94 CEC Command List....................94 7. Specifications ......................97 SC-50d/SC-60d Projector Specifications ..............97 DHD Controller Specifications ..................99 SC-50d/SC-60d Dimensions ..................101 SC-50d/SC-60d Dimensions with CineWide with AutoScope Assembly ....102 Supported Timings ....................103 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual xiii Downloaded From projector-manual.com Runco Manuals...
  • Page 14 Table of Contents Notes: Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 15 4-1. SC-50d/SC-60d OSD Menu Structure ...............51 4-2. Typical PLUGE Pattern for Adjusting Brightness ............56 4-3. Typical Gray Bar Pattern for Adjusting Contrast ............57 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint........58 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 16 4-7. CIE 1931 Chromaticity Diagram .................67 5-1. Opening the Lamp Door .....................81 6-1. RC5 Message Format ....................91 7-1. SC-50d/SC-60d Dimensions..................101 7-2. SC-50d/CineWide with AutoScope and SC-60d/CineWide with AutoScope Dimensions ......................102 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 17: Introduction

    Target Audience out of the SC-50d/SC-60d. Runco has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest version of this and other Runco product manuals on-line, at www.Runco.com.

  • Page 18: Using This Manual

    SC-50d/SC-60d Private Cinema Projector and DHD Controller Installation instructions First-time configuration instructions Advanced configuration instructions Troubleshooting tips Specifications for the Signature Cinema™ Series SC-50d/SC-60d Private Cinema Projector and DHD Controller Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 19: Description, Features And Benefits

    The SC-50d and SC-60d join and Benefits Runco’s legendary SC-1 and offer the best cinematic experience available for the most sophisticated private cinemas. The Signature Cinema™ Series SC-50d/SC-60d Private Cinema Projector and DHD Controller offers exceptional performance with a state-of-the-art product that provides an extraordinary cinematic experience.

  • Page 20: Key Features And Benefits

    • Multiple lens options including compatibility with Runco’s award-winning CineWide™ ® with AutoScope • Ships with Runco’s DHD Controller featuring ViVix™ video processing for exceptional scaling, analog to digital signal conversion, and control via IR or RS-232 • Bundled with two years of Runco PremierCare™ service program providing on-site calibration and two years of ongoing support from Runco •...

  • Page 21: Controls And Functions

    Controls and Functions 2. Controls and Functions Figure 2-1 shows the key SC-50d/SC-60d components. SC-50d/SC-60d at a Glance Figure 2-1. SC-50d/SC-60d Top/Rear/Front View Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 22: Sc-50D/Sc-60D Input Panel

    RS232 IN Analog Signal Signal 1 - Dual Link DVI-I Digital 2 - VGA 2 - VGA Signal Signal 2 - VGA 2 - VGA Figure 2-2. SC-50d/SC-60d Input Panel Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 23 Connect the projector to power here. Use ONLY the AC power cord shipped with the WARNING SC-50d/SC-60d for this purpose (the one with the ferrite sleeve). Doing otherwise creates a fire hazard risk. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 24: Dhd Controller Front Panel

    Use to direct-select aspect ratios or move the OSD menu cursor down. When no menu is present on-screen, this button toggles through the different aspect ratios, in this order: 16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema - Native Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 25: Dhd Controller Rear Panel

    Output current is limited to 250 milliamperes (mA). 3. USB A standard, USB Series “B” connection to a personal computer, for performing software upgrades and other service procedures. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 26 Connect this to the DHD Input on the SC-50d/SC-60d (see Figure 2-2). 15. RS-232 (PC / Control) A female, 9-pin D-sub connector for interfacing with a PC or automation/control system. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 27: Sc-50D/Sc-60D Remote Control Units

    Controls and Functions The SC-50d/SC-60d ships with two remote control units: SC-50d/SC-60d • A standard Runco DHD Controller remote control unit; and Remote Control Units • A “setup” remote control unit for making lens adjustments. Only the setup remote control can be used to perform lens shift, zoom and focus adjustments.
  • Page 28 9. VID 1 (1) / VID 2 (2) / VID 3 (3) Press to select a composite video input as the source or to enter the numeric character “1,” “2” or “3.” Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 29 Enlarges a 4:3 image horizontally in a non-linear fashion to fit 16:9 full screen display. CINEMA For viewing 2.35:1 source material. V-CINE Selects the Virtual Cinema aspect ratio, used for viewing 16:9 source material on a 2.35:1 screen. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 30: Setup Remote Control

    • LENSS Button Press to access the lens shift controls. • MAIN Button Press to return to the Main lens control menu from the FOCUS, ZOOM or LENSS (lens shift) page. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 31: Installation

    • If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage. • Do not expose batteries to excessive heat such as from sunshine, fire or the like. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 32: Notes On Remote Control Operation

    DHD Controller input and display mode (resolution/frame rate); save settings when finished: • Aspect ratio • Color level • Brightness • Tint • Contrast • Input position • Color temperature and white balance Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 33: Installation Considerations

    Images may then appear washed out and less vibrant. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 34: Throw Distance

    4.16 - 6.93 499.20 831.60 3.12 - 5.20 494.93 824.88 Cinco Note: Due to normal manufacturing variances, throw distance can vary by up to +/- 5 percent from these specifications. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 35: Vertical And Horizontal Position

    Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or projector is used in this example. Figure 3-3. Vertical Lens Shift (EXAMPLE ONLY) Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 36 Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or projector is used in this example. Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY) Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 37 1. Vertical shift limits are percentages of the screen height. Horizontal shift limits are percentages of the screen width. 2. Vertical lens shift figures are for ceiling mount configurations. For floor installations (where the projector is upright), reverse the up/down vertical lens shift percentages. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 38: Folded Optics

    First-surface mirrors provide a strict reflection without the “ghosting” effect seen with a second surface mirror, where a faint secondary reflection could be observed coming from the front surface of the glass. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 39: Audio/Video Synchronization Issues

    In order to easily Synchronization Issues solve this issue, Runco recommends using the DHD Controller with a high-quality audio receiver that has the ability to effectively synchronize audio and video signals.

  • Page 40: Ventilation

    • Keep the projector away from devices that radiate electromagnetic energy such as motors and transformers. Common sources of these include slide projectors, speakers, power amplifiers and elevators. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 41: Installing The Primary Projection Lens

    6. While holding the lens flat against the lens mount, rotate the lens clamp clockwise to lock the lens assembly in place. 7. Re-attach the lens mount security screws that you removed in Step 4. 8. Remove the front lens cap. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 42: Installing The Optional Cinewide With Autoscope Lens Motor

    See Figure 3-7. Then, connect the +12V trigger input on the motor to a +12V trigger output on the as shown in Figure 3-18. DHD Controller Figure 3-7. Attaching the AutoScope Lens Motor to the Projector DO NOT OVER-TIGHTEN THE SCREWS. Caution Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 43: Mounting The Sc-50D/Sc-60D

    SC-50d/SC-60d and suspend it from (Inverted) the ceiling using a specially-designed ceiling mount fixture. Use only the Runco-approved ceiling mount kit designed for your Note projector. Install the ceiling mount kit according to the instructions provided with the kit.

  • Page 44: Adjusting The Projection Angle

    Figure 3-8. Mounting Angle Ranges (Front-to-Back and Side-to-Side) If you do this, you may need to vertically shift the image to compensate. For detailed instructions, refer to Primary Lens Adjustments: Focus, Zoom and Position on page 41. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 45: Connections To The Sc-50D/Sc-60D And Dhd Controller

    Video 2 RS-232 Video 3 PC / Control HDMI 2 HDMI 4 Ethernet HDMI Out Audio Only HDMI Out To Display Figure 3-9. Connecting the SC-50d/SC-60d to the DHD Controller Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 46 SIG GND 1, 4, 6, RS232 IN 1, 6 NO CONNECTION 7, 8, 9 6-position DB9 Male RJ11 Male Figure 3-10. RS-232 Connection from the DHD Controller to the SC-50d/SC-60d Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 47: Connecting Source Components To The Dhd Controller

    HDMI 4 Ethernet Audio Only HDMI HDMI AV OUT AV OUT HDMI HDMI AV OUT AV OUT HDMI sources (BD, DVD, DTV Set-Top Box etc.) Figure 3-11. HDMI Source Connections Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 48: Component Video Source Connections

    HD1, HD2 and/or Component/SCART inputs as shown in Figure 3-12. TRIGGERS Component / SCART Video 1 Video 2 Video 3 RCA-to-BNC adapter COMPONEN T VIDEO OUT DTV-Set-Top Box (DTV-STB) BD/DVD Figure 3-12. Component Video Source Connections Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 49: Rgbhv Source Connections

    Installation RGBHV Source Connections: Connect personal computers and/or other RGB sources to the HD1 and/or HD2 inputs as shown in Figure 3-13. RGB Camcorder Computer Figure 3-13. RGBHV Source Connections Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 50: Scart Rgbs Source Connections

    SCART source to the Video 1 input on the DHD Controller. See Figure 3-14. TRIGGERS Component / SCART Video 1 Video 2 Video 3 SCART-to-RGBS adapter Green DVD/DTV STB Blue Sync Gaming Console Figure 3-14. SCART RGBS Source Connections Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 51: Composite Video Source Connections

    Composite Source Connections: See Figure 3-15. TRIGGERS Component / SCART HDMI 1 Video 1 Video 2 Video 3 HDMI 2 Composite Camcorder Composite Composite Gaming Console Figure 3-15. Composite Video Source Connections Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 52: Connecting An Audio Processor Or Secondary Display Device To The Dhd Controller (Optional)

    Video 3 Video 3 HDMI Out HDMI 2 HDMI 2 HDMI 4 HDMI 4 Ethernet Ethernet Audio Only Secondary Display Audio Processor/ Switcher Figure 3-16. Audio Processor Connection to DHD Controller Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 53: Additional Connections To The Dhd Controller (Optional)

    2 Receive Data to Automation/ 3 Transmit Data Control System 5 Ground or PC (none of the other pins are used) Figure 3-17. RS-232 Control System Connection to DHD Controller Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 54: Connecting 12-Volt Trigger Outputs

    HDMI 3 HDMI 3 Video 1 Video 1 Video 2 Video 2 Video 3 Video 3 HDMI 2 HDMI 2 HDMI 4 HDMI 4 Figure 3-18. Connecting 12-volt Trigger Outputs Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 55 IR Repeater (3.5-mm, mini phono plug) Display Control RS-232 To Accessory Box HDMI Out To Display RS-232 PC / Control HDMI Out Ethernet Audio Only Figure 3-19. External IR Receiver Connection Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 56: Connecting To Ac Power

    Plug the female end of the AC power cord into the AC input on the rear of the lens motor assembly. Connect the other end to your AC power source. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 57: Turning On The Power

    ZOOM+ button. • Lens Shift: To change the lens (and projected image) position, press LENSS, then press and hold the LENS , LENS , LENS or LENS button. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 58: Adjusting The Picture Orientation

    3. Select Display Device from the Service Menu. 4. Select Configure from the Display Device menu, then select Installation. 5. Select Orientation, then choose Floor/Rear, Ceiling/Front or Ceiling/Rear, to match the installation method. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 59: Adjusting The Image Geometry

    “keystoning” (mis-aligned corners) or “pincushion” distortion (mid-points not aligned with corners). See Figure 3-21. Horizontal Keystoning Vertical Keystoning Pincushion Distortion Figure 3-21. Keystone and Pincushion Distortion Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 60: Image Alignment Controls

    4. Smaller “y” values move a point up; larger values move it down. Figure 3-22. Image Alignment Controls The “Left Middle y” setting also controls the “Right Middle” Note y-coordinate. Similarly, the “Top Middle x” setting also controls the “Bottom Middle” x-coordinate. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 61: Installing And Adjusting The Cinewide Anamorphic Lens

    3-23. Some components shipped with your projector may differ slightly from what is shown in these instructions. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO. Lens Adapter Ring and...

  • Page 62: Attach Lens Mounting Assembly To Lens Motor Carriage Plate

    6. Attach the lens to the Lens Adapter Ring by threading it clockwise. Lens threads into ring Figure 3-24. Attaching the Anamorphic Lens to the Lens Ring Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 63: Configure Lens Motor Trigger (Cinewide With Autoscope)

    Too Far Left Correct position Too Far Right 4. When the horizontal position is properly set, tighten the Yaw/X-Adjustment Levers to secure the lens in place. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 64 There may be some pincushion distortion even after the lens is Note properly adjusted, especially at shorter throw distances. If this is the case, Runco recommends that you slightly over-scan the image into the screen frame area to mask the distortion. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual...
  • Page 65 Anamorphic Lens Set Screw (item #10) to secure the lens in place. (When viewed from the front, the rear opening on the anamorphic lens should appear as a tall, narrow oval.) Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 66: Verify Proper Image Alignment With Anamorphic Lens

    To access them, choose Calibration from the Main Menu and enter the Calibration menu passcode. Then, choose Display Color -> Lamp (refer to Lamp on page 66) or Display Color -> RVR (refer to RVR on page 68). Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 67: Operation

    5, 6, 7 ... 15 ... 59, 60 Note: Default settings appear in bold type. Splash Enable On/Off OSD Position Hor. / Ver. 0, 1, 2 ... 100 Figure 4-1. SC-50d/SC-60d OSD Menu Structure Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 68 Auto Check for New Firmware, Auto Auto Firmware Upgrade Perform Upgrade, Check for New Firmware Network E-Mail Address, Error Notification, Error Notification to Runco, Periodic Service E-Mail Notification Notification, Lamp Life Notification, Customer Information, E-Mail Calibration Data Remote Network Control...

  • Page 69: Main Menu

    • Viewer preference (original aspect ratio with “black bars,” or a full-screen presentation with some distortion or cropping). The aspect ratio selection is automatically saved for each input and Note resolution. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 70 16:9 Screen (Display) screen. 4:3 Image on 16:9 Screen with VirtualWide On a 2.35:1 screen, the image is 4:3 Image on centered between black bars on 2.35:1 Screen with VirtualWide either side. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 71 320 on the left and right sides and 180 above and below. 720p HDTV Image With SDTV and EDTV sources, the DHD Controller scales the image horizontally to achieve a 16:9 aspect ratio. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 72: Picture

    Color implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco Tint recommends that setup and calibration be performed by an ISF certified installation Sharpness technician.
  • Page 73 Brightness and contrast controls are interactive. A change to one Note may require a subtle change to the other in order to achieve the optimum setting. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 74 8. Press EXIT (or MENU) repeatedly to return to the Main Menu. 9. Select Picture from the Main Menu and press ENTER. 10.Select Color from the Picture menu and press ENTER. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 75 Like the brightness and contrast controls, the color and tint controls Note are interactive. A change to one may require a subtle change to the other in order to achieve the optimum setting. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 76: Input Position

    Width: Select Width from the Input Position menu to change the projected image width. Press to increase the width; press to decrease it. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 77 5% on all sides or 10% total. Figure 4-6 illustrates the effect of each overscan mode setting. Crop Zoom 16:9 = Source Image Area = Edge Noise = Screen (16:9) Figure 4-6. Overscan Modes Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 78: Memory Presets

    Use the Memory Presets menu to recall saved image presets, or to save image settings in the “Custom 1” or “Custom 2” memory location. The currently-selected preset is indicated by a “ ” to its left; in the example shown here, ISF Night is selected. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 79: Sleep Timer

    Press to select Off, 30 Minutes, 60 Minutes, 90 Minutes, 2 Hours or 4 Hours. Then, press ENTER. Sleep Timer 30 Minutes 60 Minutes 90 Minutes 2 Hours 4 Hours Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 80: Information

    Information your DHD Controller and display device. Signal System Should you ever need to contact Runco Technical Support, this information will help them Network answer your questions or resolve product performance issues. Field Service Manufacturing...

  • Page 81: Calibration

    Advanced. Then, select Advanced from the Gamma menu to select one of up to 20 pre-programmed gamma tables. Custom gamma tables provide the ability to perform complex, non-linear gamma correction on each primary color channel independently of the others. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 82 CIE chromaticity graph, shown in Figure 4-7. (CIE stands for “Commission Internationale de l’Éclairage” (International Commission on Illumination), the organization responsible for color measurement and management standards.) Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 83 Table 4-2. Color Temperature Presets and Associated Color Points Associated x/y Values Color Temperature Preset 3200K 0.423 0.404 5500K 0.332 0.348 6500K 0.313 0.329 7500K 0.299 0.315 9300K 0.284 0.298 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 84 HDMI 1 • Duplicate ISF Night settings for a given source and signal format and save them in the Signal Format 1080p/60 Custom 1 memory preset. Memory Preset ISF Night Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 85 • Splash Timer: When you turn on the SC-50d/SC-60d, it projects a welcome screen with the Runco and ISF logos, along with the personalized information you enter as described above. Select Splash Timer from the Splash Configure menu to set the amount of time for which this screen appears.

  • Page 86: Service

    Color Bars 2 Use this pattern when adjusting the focus. Focus Use this pattern when making brightness, contrast or white balance (gain/offset) adjustments. Grey Bars Press MENU to exit test pattern mode. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 87 To manually configure these values, set DHCP to Off. The IP Address, Subnet Mask and Default Gateway items in the IP Note Configuration menu are disabled (grayed out) when DHCP is enabled. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 88 Firmware from the Auto Firmware Upgrade menu. If the DHD Controller finds a new firmware version, select Yes to perform the upgrade or No to return to the previous menu. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 89 “DHD Error” or “Display Error” occurs, select Error Notification from the E-Mail Notification menu and set it to On. • Error Notification to Runco: To have the DHD Controller send an e-mail message to Runco Customer Support when a “DHD Error” or “Display Error” occurs, select Error Notification to Runco from the E-Mail Notification menu and set it to On.
  • Page 90 E-Mail Calibration Data from the E-Mail Notification menu. To confirm this action, select Yes and press ENTER. To cancel and return to the previous menu, select No. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 91 • Input Levels If additional fine-tuning is necessary after performing an Auto Calibration, use the controls in the Picture menu (refer to page 56) or Calibration menu (refer to page 65). Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 92 The range is from 0 to 255 inclusive for each color component (red, green and blue). The inactive image area is on either side of the active image area when using the 4:3 aspect ratio. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 93 3. The LED turns off to confirm the code change. If you enter an invalid code, the LED flashes for three or four seconds. Try again, entering a valid code. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 94 The default setting is On. For more information about CEC, refer to Using HDMI CEC Messages on page 94. The DHD Controller does not transmit HDMI CEC control Note messages from the “HDMI Audio Out” connector, regardless of the CEC setting. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 95 This action is not undoable. Proceed with caution! Before you Caution perform a System Reset, save your “Custom” Memory Presets (page 62) and ISF Day/Night Memory Presets (page 68). Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 96 Operation Notes: Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 97: Maintenance And Troubleshooting

    For lamp or filter replacement, please contact your nearest Runco authorized service center or Runco dealer. Do not attempt to replace the lamp yourself! 1. Turn off the projector and unplug the power cord. Allow the projector to cool down for approximately 15 minutes prior to removing the lamp assembly for replacement.
  • Page 98 6. Close the lamp compartment cover and tighten the captive screw. The lamp will automatically turn on again when the cover is closed. Note 7. Re-attach the Left (Exhaust) Side Panel to the projector. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 99: Troubleshooting Tips

    Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the SC-50d/SC-60d. If the suggested solutions fail to resolve the problem Troubleshooting Tips or if you encounter an issue not described here, please contact Runco Technical Support. Table 5-1. Troubleshooting Chart Symptom...
  • Page 100 DHD lens motor and DHD Controller. Controller (Figure 3-17). • Incorrect trigger • Correct the trigger assignment. assignment (refer to Installing and Adjusting the CineWide Anamorphic Lens on page 45). Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 101: External Control

    ISF splash screen (refer to Splash Configure on page 69), allow 15 seconds for the DHD Controller to power up. Once it does, it will accept and properly execute multiple serial commands. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 102 Selects the HDMI 3 input HDMI4 Selects the HDMI 4 input Selects the RGB HD 1 input Selects the RGB HD 2 input INPUT? Returns active input SCART Selects the SCART input Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 103 Adjusts phase PHASE? Returns phase setting value SHARPNESS -50/50 Sets a value for sharpness SHARPNESS? Returns sharpness setting value TINT -50/50 Sets a value for tint TINT? Returns tint setting value Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 104 Returns output horizontal position value OVPOS -50/50 Sets the value for output vertical position OVPOS? Returns output vertical position value OWIDTH -50/50 Sets the value for output width OWIDTH? Returns output horizontal width value Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 105 IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote. DOWN Down-Arrow ( ) key ENTER ENTER key EXIT EXIT key LEFT Left-Arrow ( ) key MENU MENU Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 106: Using Discrete Ir Codes

    • Six (6) data bits. • The carrier frequency is 36 kHz, with the modulated pulses having a 25% duty cycle. • Commands are sent at a maximum rate of 9 Hz. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 107 1.78 ms Modulated Carrier Zoom In of Carrier 27.8 µs First Packet Repeated Packet RC5 Packet Transmission 14 cycles, 24.9 ms 64 cycles, 113.8 ms Figure 6-1. RC5 Message Format Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 108: Ir Command List

    Sets the sleep timer to 30 minutes Note: These codes assume that the default address of 17 is used. If you change it to something other than 17, you will need to modify these codes accordingly. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 109 VirtualWide aspect ratio Note: These codes assume that the default address of 17 is used. If you change it to something other than 17, you will need to modify these codes accordingly. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 110: Using Hdmi Cec Messages

    0x9D – √ CEC Version 0x9E – √ Set OSD Name 0x47 – √ Menu Status 0x8E – √ Report Power Status 0x90 – √ Set Menu Language 0x32 – Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 111 – √ Menu Request 0x8D – √ Give Device Power Status 0x8F – The DHD Controller does not transmit HDMI CEC control Note messages from the “HDMI Audio Out” connector. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 112 External Control Notes: Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 113: Specifications

    Picture Size (16:9 Screen), Recommended Width: 120 - 198 in. SC-50d: Maximum Width: 420 in. Processing: Runco DHD4 Processor with ViVix IV™ technology and BRiC (Backup, Recovery and Clone) tool Control Options: • Serial commands via RS-232 • Discrete infrared (IR) remote •...
  • Page 114 FCC Part 15, Subpart B Class A, UL 60950, IEC60950, RoHS Limited Warranty: Two (2)-year PremierCare™ warranty; lamp warranty 1000 hours or (6) six months, whichever comes first (US and Canada only) Specifications are subject to change without notice. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 115: Dhd Controller Specifications

    Parameters: Trigger Outputs: (3) +12 VDC, each rated at 250 mA and thermal fuse-protected Accessory Applications: Runco Firmware Upgrader, Runco BRiC (backup, restore, clone), CalMAN by SpectraCal for automatic calibration Power Requirements: 100-240V~, 47-63Hz, 0.45 Amps Operating Environment: 41°F to 104°F (5°C to 40°C), 0% to 90% humidity (non-condensing);...
  • Page 116 FCC class B, CE, RoHS, China RoHS, WEEE, C-Tick, CCC, local conformances as required Limited Warranty: Two (2) years parts and labor from the date of shipment from Runco. Specifications are subject to change without notice. Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 117: Sc-50D/Sc-60D Dimensions

    Specifications Figure 7-1 shows the SC-50d/SC-60d dimensions. SC-50d/SC-60d Dimensions Figure 7-1. SC-50d/SC-60d Dimensions Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 118: Sc-50D/Sc-60D Dimensions With Cinewide With Autoscope Assembly

    AutoScope Lens angle, height, and distance from projector is adjustable for multiple lenses 11.3in 26.9in 288.3mm 682.4mm 4.5in 114.6mm Figure 7-2. SC-50d/CineWide with AutoScope and SC-60d/CineWide with AutoScope Dimensions Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...

  • Page 119: Supported Timings

    60.289 102.250 – – √ √ √ 85.00 68.633 117.500 – – √ √ √ 60.00 60.000 108.000 – – 1280x960 1280x960 √ √ √ 85.00 85.938 148.500 – – Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 120 NTSC 3.58 – 59.94/60.00 15.734/15.750 3.580 – – – – √ NTSC 4.43 – 59.94/60.00 15.734/15.750 4.430 – – – – √ PAL-B/G/H/I – 50.00 15.625 4.430 – – – – Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 121 NTSC 3.58 – 59.94/60.00 15.734/15.750 3.580 – – – – √ NTSC 4.43 – 59.94/60.00 15.734/15.750 4.430 – – – – √ PAL-B/G/H/I – 50.00 15.625 4.430 – – – – Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 122 √ PAL-M – 59.94/60.00 15.734/15.750 3.580 – – – – √ PAL-N – 50.00 15.625 3.580 – – – – √ √ SECAM – 50.00 15.625 13.500 – – – Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual Downloaded From projector-manual.com Runco Manuals...
  • Page 123 Downloaded From projector-manual.com Runco Manuals...
  • Page 124 020-1105-00 Rev. A March 2011 Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com Downloaded From projector-manual.com Runco Manuals...

This manual is also suitable for:

Signature cinema sc-60d seriesSignature cinema sc-60Signature cinema sc-50

Table of Contents