Maintenance; Washing Of The Coffee Groups - Rancilio Classe 8 S Use And Maintenance Manual

10. MAINTENANCE

abrasive devices, such as steel wool, metal
10.1. Daily (Fig.15)
Use a clean cloth or sponge that does not leave hairs
steel.
Clean the steam and hot water spouts and check
encrusted, be careful not to deform or damage
them).
supplied.
10.2. Weekly
Operations to be carried out with the machine
put in a spoonful of detergent in powder for coffee
cleaned.
Press the coffee dispensing button and draw water
for approx. 30 seconds.
Stop and start dispensing several times until clean
water comes out of the discharge unit tube.
Cleaning the filters and delivery heads (Fig.16)
Operation to be carried out when the machine is off
and cold.
Prepare a solution of 4 sachets of detergent powder
Code 69000124 dissolved in a litre of boiling water
in a stainless steel, plastic or glass recipient (NOT
ALUMINIUM OR IRON).
holders in the prepared solution, leaving them for
at least 10/20 minutes (all night is better).
Remove them from the container and rinse them
Remove the cup rack 1 (Fig.16), slide out the drip
-
Check and clean the drainage sump 4 (Fig.16),
Remove the cup-holder grid 1 (Fig. 16) and clean
discharge 2

10.2.1 Washing of the coffee groups

-
the coffee groups.
Keep "ENTER" button pressed to start washing until
"Group Cleaning?"
"press <ENTER>"
"enter" within 10 seconds, the following
-
"Cleaning runnign"
- Starts dispensing from the groups for 10 sec.
- Pauses for 10 sec.
press <ENTER>"
"enter"
- Starts dispensing from the groups for 30 sec.
- Pauses for 30 sec.
phase will take place.
N.B. In the washing and rinsing phases the groups
"Insert blind
then <ENTER>"
"enter"
"Remove filterh.
"Rinsing"
-
during the
59