Preparing Tea, Camomile, Etc; Heating Milk Or A Drink (Isteam); Preparing Frothed Milk (Isteam); Programming Functions - Rancilio Classe 8 S Use And Maintenance Manual

8.4. Preparing tea, camomile, etc.

Place the jug under the hot water spout and use
off the switch.
Add the beverage desired.
Models DE
measures (see paragraph 9, adjusting the dose of
hot water).
To dispense hot water in different quantities, proceed
as follows:
When the desired measure has been obtained,
8.5. Machines with ISTEAM automatic sy-
stem

8.5.1 Heating Milk or a Drink (ISTEAM)

Immerse the wand in the drink
drink
Press button 6.2 again to stop heating at the de-
sired temperature.
programmed temperature.

8.5.2. Preparing Frothed Milk (ISTEAM)

Immerse the wand in a container containing at
least 250 cc of milk (the sensor must be at least
3 cm below the water level).
To obtain best results, use refrigerated milk ( 5°C)
- ( 41°F)
Press button 6.1 again to stop the machine at the
desired temperature and emulsion level.
set temperature and level of froth.

8.6 Programming functions

8.6.1 Programming Panel (Mod.DE)
following functions (Fig.10):
1° Button "+"
2°Button "-"
3° Button "enter" To enter the programming
4° Button "esc"
8.7 Barman Programming (Mod.DE) (Fig.12)
-
+" and "-
will be browsed:
Programming with the following sub-menus:

- Clock

- Set date
- Set time
- Date/time format

- Set timer

8.7.1.Clock
Sub-menu to set date and time and mode (24 hours
8.7.2 Set timer
Menu to set automatic switching on/off of the machine
as follows:
- select automatic or manual switching on (to enable
function or not)
- set working hours
To browse from one menu to another press "+" or "-",
"enter", to exit press "esc".
To move to a higher level in the
programming menus. Or to
increase the value
To move to a lower level in the
programming menus. Or to
decrease the value
To quit the menu
Or to quit programming mode.
+" or "-
57