Passenger Bench Seats; Grocery Bag Retainer; Rear-Most Bench Seat - Chrysler Voyager 2001 Operating Information Manual

To reinstall the rear seat, remove any obstructions
from the floor in front of the seat. Align the seat in
the floor tracks and tilt the seat forward to engage
the front floor attachments, then tilt the seat rear-
ward and push down to engage the rear attach-
ments. Pull the release handle "1" to return the
seatback to its full upright position and reinstall
the head restraint.
WARNING!
In a collision, you or others in your vehicle could
be injured if seats are not properly latched to
their floor attachments. Always be sure the
seats are fully latched.
3 – Passenger Bench Seat
Release levers are located on the rear leg assem-
blies, near the floor. To remove the seat, squeeze
each release handle and rotate downwards to
deploy the wheels. A lock indicator button pops
up when the seat is unlocked. The seat assembly
can now be removed from the vehicle and moved
on its Easy Out Rollers.
50
To reinstall the seat, roll the seat into position over
the strikers in the floor. Squeeze the release
handle and rotate upward until the lock indicator
button returns in to the handle.
WARNING!
If not properly latched, the bench seats could
become loose. Personal injuries could result.
After reinstalling these seats, be sure the red
indicator button on the release handles return
into the handles.

Grocery Bag Retainer

Retainer hooks which will hold grocery bag
handles are built into the seatbacks of all rear
seats and front seats. The floor supports the
partial weight of the bagged goods.

Rear-Most Bench Seat

The seat position can be adjusted fore and aft to
any of three positions - normal (rearward), inter-
mediate, and full forward. In this way varying
needs for legroom and cargo space behind the
seat can be accommodated.