Security Chip Configuration; Tpm Support - Advantech AIMB-562 KIOSK User Manual

! UR2 Duplex Mode
This item allows you to select the IR half/full duplex function. The options are
"Half" and "Full".
! Use IR Pins
The options are "RxD2, TxD2" and "IR-Rx2Tx2".
! Onboard Parallel Port [378/IRQ7]
This item allows user to adjust parallel port of address and IRQ.
! Parallel Port Mode [ECP+EPP]
This item allows user to adjust parallel port mode.
! EPP Mode Select [EPP1.9]
This field allows you to select EPP port type 1.7 or 1.9. The choices are
"EPP1.9" and "EPP1.7".
! ECP Mode Use DMA [3]
This item allows user to adjust ECP DMA resource.
Onboard Serial port 3 [3E8/IRQ10]
!
This item allows user to adjust serial port 3 of address and IRQ.
! Onboard Serial port 4 [2E8/IRQ10]
This item allows user to adjust serial port 4 of address and IRQ.
3.2.6

Security Chip Configuration

3.2.7

TPM Support

The items in this menu allow you to set the TPM (Trusted Platform Module) features.
Select an item and then press <Enabled> to display the configuration options.
Note! To enable the TPM function, set the TPM Support item to [Enabled] and
then save the change; after rebooting, the TPM configuration menu will
show the active options.
AIMB-562 KIOSK User Manual 40