Preparing The Cts For Operation - Exabyte exb-8205 Maintenance Manual

8mm cartridge tape subsystems

Hide thumbs Also See for exb-8205:

Table of Contents

Preparing the CTS for operation

After replacing the right panel, do the following to prepare the CTS for operation:

Perform a...

Power-on

EXPERT WrtVari

test

Refer to the

EXPERT User's

Guide for the 8mm

Cartridge Tape

Subsystem .

Successful test

The bottom LED is lit when

the power-on self-test is

complete.

5 Replacing FRUs

Unsuccessful test

The top and middle LEDs

flash.

Make sure the power cable

and SCSI cable are

correctly installed.

Try the power-on self-test

again. If it fails again,

contact your vendor.

Table of Contents

Do you have a question about the exb-8205 and is the answer not in the manual?

Exb-8505