Network Parameter - UTStarcom Vonage F1000 series Handbook

F1000 series

Hide thumbs Also See for Vonage F1000 series:

Table of Contents

Menu -> WiFi-Settings

- User & Call Settings: To configure the phone's user settings

4. After configuring the desired parameters, click <submit> and then

click <REBOOT> to initiate and save the configurations.

4.5.4 Network Parameter

WiFi-SettingsNetwork Parameter

This option enables you to set network parameters:

4.5.4.1 DHCP

WiFi-SettingsNetwork ParameterDHCP

If the DHCP function is active, the phone will obtain an IP address

automatically from the DHCP server. When you highlight this option, the

current setting will be displayed in the adjacent bubble.

After accessing this option, select Disable or Enable to disable or

enable DHCP.

Table of Contents

Do you have a question about the Vonage F1000 series and is the answer not in the manual?