Time Zone - UTStarcom Vonage F1000 series Handbook

Menu -> Tools
4.4.3.2 Set Time
ToolsAlarmSet Time
Select this option to set the alarm time. Enter the time in the
corresponding time format, and then press the left soft key
complete the operation.
When you key in the time, you can press

modify the number
The cursor will advance if the number entered is valid; otherwise, the

phone will sound an error tone (if the keypad tone is set to On)
4.4.3.3 Snooze
ToolsAlarmSnooze
If this function is activated, the alarm will repeat 3 times at 5-minute
intervals after the original alarm time expires.
You can select On or Off to activate or deactivate this function.

4.4.4 Time Zone

ToolsTime Zone
This function enables you to change the current time zone.
After you access this option, some cities (time zones) and their time
differences will be displayed; the current time zone will be highlighted.
Press to highlight the desired time zone, and then press the left soft
key (O k) to set it as the current time zone. The phone's time will
change accordingly.
54
to move the cursor and
(Ok) to