System Integration - Raymarine Evolution EV-2 Installation Instructions Manual

2.4 System integration

The Evolution components are compatible with a wide range of marine electronics devices.
1
Note: To prevent potential data bandwidth issues, do NOT connect an SR50 weather receiver to a system that includes Evolution
autopilot components. The SR50 should be connected to a dedicated system bus which is isolated from the SeaTalk
that hosts the Evolution components.
Item Device type
1 Heading sensor and course
computer.
2 SeaTalk ng backbone
3 Autopilot control head.
Note: All SeaTalk
control heads have limited
functionality with the
Evolution system. Refer
to the SeaTalk to SeaTalk
converter handbook (87121)
for more information on
these limitations, and how to
connect a SeaTalk autopilot
control head to an Evolution
system.
4 SeaTalk ng multifunction displays.
Note: The Evolution EV-1
provides heading data to
multifunction displays, for
use in chart and radar
functions such as radar
overlay and MARPA.
14
2
SeaTalk ng
6
Maximum Quantity
1
1
As determined by the SeaTalk
bus bandwidth and power
loading.
ng
6
3 4
7
Suitable Devices
EV-2
• SeaTalk ng
• SeaTalk via the optional
SeaTalk to SeaTalk
converter.
ng • p70.
• p70R.
• ST70 / ST70+ (limited
functionality)
• ST6002
• ST7002.
• ST8002
• S100 remote (repeat
controller only).
• Smart controller (repeat
controller only).
• New a, c, e Series: a65 / a67
/ e7 / e7D / c95 / c97 / c125 /
c127 / e95 / e97 / e125 / e127
/ e165.
• C90W / C120W / C140W.
• E90W / E120W / E140W.
5
8
ng
Connections
• SeaTalk ng
• SeaTalk ng
• SeaTalk via the optional
ng SeaTalk to SeaTalk
converter.
• SeaTalk ng
• SeaTalk via the optional
SeaTalk to SeaTalk
converter.
• SeaTalk ng
Evolution EV-2
9
D12761-1
bus
ng
ng