Raymarine Evolution EV-2 Installation Instructions Manual page 11

calibration settings required by existing autopilots are no
longer necessary.
Parts supplied — EV-1 and EV-2
Item Description
1 Mounting trim.
2 EV-1 / EV-2.
3 Sealing ring.
4 Mounting tray.
5 Sealing ring.
6 Wall mounting bracket.
7
Screws for deck or bracket mounting.
8 Screws for wall bracket.
9 Documentation pack.
Evolution SeaTalk ng
A SeaTalk ng cable kit is available for Evolution components.
This cable kit provides the cables required to make all the
SeaTalk ng connections for some typical Evolution systems. The
kit is supplied with certain Evolution systems. The kit is also
available as an optional accessory, part number R70160. If you
require additional SeaTalk ng
your installation, refer to 3.8 SeaTalk
for a list of part numbers.
Cable kit contents
Planning the installation
1
2
3
4
5
6
Quantity
1
1
1
1
1
1
4
3
1
cable kit
cables or accessories to complete
ng cables and accessories
1
Item Description
1 SeaTalk ng power
cable.
2
SeaTalk ng backbone
cable
3 SeaTalk ng spur
cable.
7
4 SeaTalk ng 5-way
connector block.
5 SeaTalk ng T-piece.
8
6 SeaTalk ng
terminator.
Parts supplied — DeviceNet cable kit
9
D12757-1
Item Description
1 SeaTalk ng
(1.3 ft).
2 DeviceNet / SeaTalk
adaptor cable (Female).
3 SeaTalk ng
D12759-2
Quantity Length
1 0.4 m (1.3 ft)
1
5 m (16.4 ft)
1 0.4 m (1.3 ft)
—
1
—
2
—
2
Quantity
power cable 0.4 m 1
ng 2
terminator. 2
1
2
3
D12765-1
11