Raymarine Evolution EV-2 Installation Instructions Manual page 15

Item Device type
5
GPS receiver.
6
Drive interface unit
7 AIS receiver / transceiver
Note: The Evolution
system can provide magnetic
heading information to an
AIS unit. Transmission
of heading information is
optional for AIS transceivers,
and they only transmit true
heading information, NOT
magnetic.
8 Speed / Depth transducer
9 Raymarine Wind transducer
Planning the installation
Maximum Quantity
As determined by the SeaTalk ng
bus bandwidth and power
loading.
1
1
As determined by the SeaTalk ng
bus bandwidth and power
loading.
As determined by the SeaTalk ng
bus bandwidth and power
loading.
Suitable Devices
GPS position data is usually
received from a SeaTalk ng
multifunction display. If your
system does NOT include a
multifunction display, or your
multifunction display does
NOT include an internal GPS
receiver, an external SeaTalk ng
GPS receiver will be required.
• SeaTalk ng multifunction
display with internal GPS
receiver.
• RS125 GPS (via optional
SeaTalk1 to SeaTalk ng
converter.
• RS130 GPS.
• Teleflex Optimus (as supplied
separately by Teleflex).
• Volvo Penta EVC (as supplied
separately by Raymarine).
Note: Your drive system
will include either one of
these interface units, NOT
both.
• AIS 350.
• AIS 650.
Any transducer compatible with
the iTC-5 converter or ST70
transducer pod.
• Short arm wind vane
transducer.
• Long arm wind vane
transducer.
• Short arm masthead wind
transducer.
• Long arm masthead wind
transducer.
Connections
• SeaTalk ng
• SeaTalk ng
• SeaTalk ng
• Analog transducer
connections via iTC-5
converter or ST70 transducer
pod.
• Other transducer connections
via compatible Sonar Module.
Analog transducer connections
via iTC-5 converter or ST70
transducer pod.
15