Wiring Of Principal Connectors - Engl INVADER II Operator's Manual

Wiring of Principal Connectors

MIDI In (44), DIN connector
Pin 3 - N.C.
Pin 5 - MIDI-data wire
*: AC voltage is routed to pin 1 and 2 only when the slide switch 45
is set to ENGL MIDI Footcontroller.
Serial Amp Control Port (47)
Stereo
1/4" jack
Very important:
use a stereo
plug only!
sleeve: Ground, GND
Connect ENGL
Custom Z-9
Footswitch only!
Pin 4 - MIDI-data wire
Pin 2 -
power supply
approx.11 volts AC *
ring: Data
tip: + 5 volts
page: 21
1/4" plug
Pin 1 - power supply
approx.11 volts AC *
page: 19
Dual Footswitch (48)
Use a stereo
plug only!
tip
ring
sleeve
Stereo
Stereo
1/4" jack
ring: CH 1< >3 / 2< >4
tip: Up/Down
sleeve: Ground, GND
page: 21
35