Setting The Real-Time Clock; Panic Keys - ADEMCO VISTA-20PS Series Installation And Setup Manual

Panic Keys

There are three Panic keys (A, B, and C) that, if programmed, can be used to manually initiate
alarms and send a report to the central station.
Each key can be programmed for 24-hour Silent, 24-hour Audible, Fire, or Personal Emergency
responses.
The programmed Panic response is activated when the appropriate key is pressed for at least 2
seconds.
The Panic keys are identified by the system as follows:
Keys
[A] (∗/1)
[B] (∗/#)
[C] (3/#)
IMPORTANT: For a Silent panic function (if programmed) to be of practical value, you must
program a report code for the zone and the system must be connected to a central station.

Setting the Real-Time Clock

Set the time and date by doing the following:
1.
(Security Code)
2. Press [∗] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [ ∗ ]. To go back, press [#].
• Enter the 2-digit hour setting.
• Enter the 2-digit minute setting.
• Press [1] for PM or [2] for AM.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting.
• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit, or
wait 10 seconds.
Displayed as Zone
95
99
96
+[#] + [6] [3]
Alpha Display:
(-7%61)(
6)%(= 83 %61
8-1)(%8) 7%8
 41 
Current time display
8-1)(%8) 7%8
 4
Time/date editing display
System Operation
12-3