Setting
VLAN ID
Priority
PC (KX-UT123/
KX-UT133/KX-UT136
only)
VLAN ID
Priority
Speed/Duplex
LAN port
PC port (KX-UT123/
KX-UT133/KX-UT136
only)
Embedded web
Press [ ] and [ ] to switch between these items.
*1
Network Test
Setting
Network Test
Document Version 2011-09
Description
Specify the VLAN ID.
Specify the priority of packets sent
from this unit.
Specify the necessary settings for
using a PC over a VLAN.
Specify the VLAN ID.
Specify the priority of packets sent
from this unit.
Select the connection mode
(combination of link speed and
duplex mode) of the LAN port and PC
port.
Select the connection mode of the
LAN port.
Select the connection mode of the
PC port.
Enable or disable Web User
Interface Programming.
Description
Confirm whether other network
devices (e.g., SIP server, routers,
switching hubs) respond to network
requests. When you select this item,
enter the IP address of the device to
which you want to test the
connection.
If a device does not respond, first
check the unit's network settings, and
then check the device's network
settings and connection.
Customizing the Telephone
Value Range
1–4094
0–7
—
1–4094
0–7
—
Auto, 10M-Full,
10M-Half,
100M-Full,
100M-Half
Auto, 10M-Full,
10M-Half,
100M-Full,
100M-Half
On, Off
Value Range
xxx.xxx.xxx.xxx
Operating Instructions
Default
2
7
—
1
0
—
Auto
Auto
Off
Default
—
45