Table of Contents
Advertisement
3
Connecting System Components
Step:
4. Connect the workstation to video I/O
components.
5. Connect the workstation to a high-speed
data link device.
Connecting the Autodesk Control Surface
The Autodesk control surface consists of three panels. You can use any combination of one or
all of them. If using more than one panel, you must use the network switch included with your
shipment to cross-connect them.
Refer to the Autodesk Control Surface User's Guide for information on how to use the control
surface with Lustre.
N
:
The illustrations in this procedure only show the central module, i.e. the colour grading
OTE
panel. This is the only panel that has a USB connection for the integrated tablet, and a network
port. The other two panels only have a network port which you connect to the network switch.
22
Refer to:
"Connecting Video I/O to a Master or HD Station"
on page 30.
"Connecting to a High-Speed Data Link Device
(HSDL)"
on page 32.
Advertisement
Table of Contents
