Table of Contents
Advertisement
Press F10 to accept the changes.
3.
Select Apply Defaults and Exit.
4.
This restores the original factory system defaults.
Ensuring Proper Environmental Conditions
You should consider the following environmental guidelines for all hardware configuration:
•
Make sure the rack in which hardware components are installed is open or ventilated. Follow
the ventilation specifications that apply to your system.
•
Place all components in an air-conditioned environment. All hardware components generate
heat and must be kept cool. See
•
Keep all hardware components in a clean, dust-free location.
•
Minimize vibration and humidity.
•
Do not block the vents on the component housing.
•
Do not drape anything, such as a jacket or a blanket, over hardware components.
•
Minimize electromagnetic noise by separating digital data and power cables from analog
audio cables and running them in different cable ducts.
Power and Air Conditioning Requirements
The values for power consumption and heat output were recorded on an Autodesk certified
system with all of the required peripheral and certified components.
N
:
These values can fluctuate if uncertified hardware components or third-party applications
OTE
are added to your system. The use of uncertified hardware components or third-party applications
is not supported. Please consult the manufacturer's documentation for standardized minimum
and maximum values.
The following table summarizes the power consumed by the HP xw8400 system and the heat it
generates under the maximum processing load produced by your Lustre application. For
detailed specifications, including noise output, see the documentation provided by the
manufacturer.
Component
HP xw8400
You must be able to meet the startup power requirement and have a climate control system with
the capacity to maintain the temperature of this component under the maximum processing
"Power and Air Conditioning Requirements"
Quantity Startup Amps
(120V / 240V)
1
3.5 / 1.8
Hardware Configuration Guidelines
Max. Amps
Watts
(120V / 240V)
2.8 / 1.4
336
on page 11.
Heat
(BTUs)
1146.4
11
Advertisement
Table of Contents
