Connecting The Autodesk Control Surface To A Lustre Workstation - HP xw8600 Workstation Hardware Setup Manual
Autodesk visual eff ects, finishing, and colour grading
Hide thumbs
Also See for xw8600 Workstation:
- Specification (87 pages) ,
- Quickspecs (53 pages) ,
- Hardware setup manual (44 pages)
Table of Contents
Advertisement
To connect the workstation to IB network:
Connect port 1 of the IB network adapter to the IB network. On the HP xw8600 workstation Port 1 is
the port furthest from the air vents. For information on how to configure the IB adapter, refer to the
application installation and configuration guide.
Connecting the Autodesk Control Surface to a Lustre
Workstation
The Autodesk Control Surface consists of three panels. The central panel requires an additional connection
to the remote unit of the USB extender kit.
This section provides information on making the physical connections needed to operate the Autodesk
Control Surface. For information on using the Control Surface, see the Autodesk Control Surface User Guide.
Connecting the Autodesk Control Surface to a Lustre Workstation | 17
Hide quick links:
Advertisement
Table of Contents
