Connection Diagram For The Hp Xw8400 - HP Autodesk Lustrexw8400 Hardware Setup Manual

2 Connecting Peripherals
Step:
5. Connect the workstation to your network.
6. After you connect all the peripherals to your Lustre
workstations, you can connect the workgroup
components together.

Connection Diagram for the HP xw8400

The following diagrams show the connections for the HP xw8400 workstation.
N :
These diagrams provide an overview of video I/O connections. For more details, see
OTE
"Connecting Video I/O to a Master or HD Station"
To USB extender for mouse,
keyboar, monitor calibrator
To Slave Renderer
To GFX monitor
1, 4 to SAN; 2, 3 to Stone
Ref In from sync gen
0 to control surface,
1 to LAN, 3 to SAN
16
HP xw8400 Workstation
(Windows Configuration)
To DVS BOB
To storage
Refer to:
"Network Connections"
19.
Chapter 3, "Connecting System
Components,"
on page 30.
HD-SDI (V2) Out
0:2:2/4:0:0 to 4:4:4
display device or VTR
HD-SDI (V1) Out 4:2:2 to 4:2:2 or 4:4:4
display device or VTR
Ref In from sync gen
Connect to second
DVI out on the
main FX5500 card
HD-SDI Out (B) to
4:4:4 VTR
(dual link 0:2:2)
HD-SDI In (B) from
4:4:4 VTR
(dual link 0:2:2)
DVI2 Out to FX5500
SDI daughter card
HD-SDI Out (A) to 4:2:2
VTR (or 4:4:4 dual link)
HD-SDI In (A) from 4:2:2
VTR (or 4:4:4 dual link)
on page
on page 21.