Connection Diagram For The Hp Xw8400 - HP XW8400 Manual

2 Connecting Peripherals
Step:
5. Connect the workstation to your network.
6. After you connect all the peripherals to your Lustre
workstations, you can connect the workgroup
components together.

Connection Diagram for the HP xw8400

The following diagrams show the connections for the HP xw8400 workstation.
N :
These diagrams provide an overview of video I/O connections. See
OTE
to a Master or HD Station"
Ref In from sync gen
To USB extender for mouse,
keyboard, monitor calibrator
To Slave Renderer
To GFX monitor
1, 4 to SAN; 2, 3 to Stone
Ref In from sync gen
0 to control surface,
1 to LAN, 3 to SAN
N :
Systems connected to the high-speed InfiniBand network may experience performance
OTE
degradation if high bandwidth is requested on the Broadcom GigE card (slot 7).
16
on page 36.
HP xw8400 Workstation
(Windows Configuration)
To DVS BOB
To storage
Refer to:
"Network Connections" on page
19.
Chapter 3, "Connecting System
Components," on page 27.
"Connecting Video I/O
HD-SDI (V2) Out
0:2:2/4:0:0 to 4:4:4
display device or VTR
HD-SDI (V1) Out 4:2:2 to 4:2:2 or 4:4:4
display device or VTR
Connect to second
DVI out on the
main FX5500 card
HD-SDI Out (B) to
4:4:4 VTR
(dual link 0:2:2)
HD-SDI In (B) from
4:4:4 VTR
(dual link 0:2:2)
DVI2 Out to FX5500
SDI daughter card
HD-SDI Out (A) to 4:2:2
VTR (or 4:4:4 dual link)
To InfiniBand switch
(optional)
HD-SDI In (A) from 4:2:2
VTR (or 4:4:4 dual link)