Air Filter Maintenance - Telair Energy 2510G User's Operating Instruction And Installation Manual

Undo the special cap on the soil sump (Fig.34
Ref.1) which can be reached through a special
hole under the sound-proofing case (Fig.35 Ref.
2) and allow all the contained oil to be drained to
a collecting tank.
After doing this, screw the cap back on and
restore the oil level inside the oil sump, using the
filler hole (Fig.33 Ref. 2).
Check the following table for the right amount of
oil to pour in the sump (Table 2).
Table 2
MODEL
Energy 2510 G
• Hot oil can scald.
• Causing the engine to run when the oil
level is too low can seriously damage it.
•
Check the oil level when the engine has
been turned off.
22
Oil quantity (litres)
0.6
Energy 2510 G
GB
disposed freely in the environment but taken
to special disposal centres carrying out
disposal and/or recycling in compliance with
the applicable law provisions in force in the
country of use.

7.4.2 Air filter maintenance

reduce air flow to the carburettor. To prevent
carburettor malfunction, check the air filter
regularly. If the engine is used in a heavily
dusty environment, we suggest checking the
air filter every time before starting up the
engine.
solvents with a low evaporation point for
cleaning the air filter cartridge, as this could
cause fires or explosions.
Never operate the engine without an air filter; the
engine would wear down quickly due to air-borne
dust.
To access the filter cartridge, remove the air filter
closing lid (Fig.36 Ref.3) after having unscrewed
both screws that fix it to the air filter box.
Take out the cartridge (Fig.36 Ref.1) and wash it
in mild detergent
Spent oil should not be
A clogged air filter will
Never use Diesel oil or
and water then
Vers. 001
rinse