Machine Safety; Using The Generating Set; Starting Up The Generating Set - Telair Energy 2510G User's Operating Instruction And Installation Manual

GB

5.1 Machine safety

The generating sets come with perfectly sealed
casings, so there is no danger of contact with any
moving or high temperature parts or with live
cables.
The doors open with a lock and key. The keys
must not be left within the reach of children or
inexperienced persons.
The generating sets
must only and exclusively be used with their
doors shut.
Remove any flammable substance (for
example: petrol, paints, solvents, etc.) from
near the generating sets.
Make sure that any hot parts of the
generating sets are not in contact with any
flammable material.
Never fill up the fuel tank while the engine is
running.
Never touch the generating sets or the wiring
connections with wet hands.
Never replace the fuses or the cut-out
switches with others having higher
amperage.
Should any electrical part need checking, this
must only be done with the engine turned off
and by specialised personnel.
The generating sets have been built in
compliance with the safety standards listed in the
EEC statement of compliance.

6 USING THE GENERATING SET

6.1 Starting up the generating set

The generating sets are provided with an
electronic remote control panel which allows you
to perform starting up / turning off operations and
to check their running conditions.
The panel controls are:
1 ON/OFF switch
2 Display unit
3 High temperature indicator
4 Engine minimum oil level indicator
5 Startup failed
6 Generator running (flashing)
Vers. 001
Energy 2510 G
17