NordicTrack T19.0 User Manual page 22

HOW TO USE THE IFIT LIVE MODE
The iFit Live mode enables the treadmill to communi-
cate with your wireless network. With the iFit Live
mode, you can download personalized workouts, cre-
ate your own workouts, track your workout results, and
access many other features. See www.iFit.com for
complete information.
1. Connect your treadmill to your own wireless
network.
See steps 1 and 2 on pages 23 and 24.
To activate and use the iFit Live mode, you must
have your own wireless network. You must have
an 802.11b router with SSID broadcast enabled
(hidden networks are not supported). You will also
need an iFit.com membership.
2. Select the iFit Live mode.
To select the iFit Live mode, first select the start
menu (see step 2 on page 16). Next, press the
Workouts button. Then, press the Live Workouts
button. You can also press the Live Workouts but-
ton on the console.
To set up an iFit Live account, or for more in-
formation about the iFit Live mode, go to
www.iFit.com.
To switch users, press the Switch User button in
the lower right corner of the screen. Then, select
the desired user.
If you have questions after reading this information,
visit www.iFit.com/support.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
speakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Locate the audio wire. Plug one end into the audio jack
on the side of the console. Plug the other end into a
jack on your MP3 player, CD player, or other personal
audio player. Make sure that the audio wire is fully
plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume level on your personal audio player or press
the Vol increase and decrease buttons on the console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
22