NordicTrack T19.0 User Manual page 10

7. Slide the Right Upright Sleeve (90) upward
against the console assembly. Attach the Right
Upright Sleeve with two #8 x 3/4" Tek Screws
(24).
Attach the Left Upright Sleeve (not shown) to
the console assembly in the same way.
8. Raise the Frame (67) to the position shown.
Have a second person hold the Frame until
step 9 is completed.
Orient the Storage Latch (87) so that the large
barrel and the latch knob are in the positions
shown.
Remove the tie from the lower end of the
Storage Latch (87). Keep the holes in the latch
cap aligned with the holes in the Storage Latch.
Make sure to keep the latch cap inside the
Storage Latch. Attach the Storage Latch to the
bracket on the Base (103) with a 3/8" x 2" Bolt
(4) and a 3/8" Jam Nut (7).
7
8
67
103
87
Latch
Knob
Large
Barrel
10
Console
Assembly
24
90
24
7
4
Latch
Cap