General Information - St. Croix SCF-Revolution Installation & Operation Manual

Multi-fuel furnace
Table of Contents

Advertisement

Save This Installation & Operations Manual

GENERAL INFORMATION

SAFETY PRECAUTIONS
SAFETY NOTICE: The furnace must be properly installed in order to prevent the possibility
of a house fire! These installation instructions must be strictly observed! The Maintenance
schedule must be followed as described in this manual. Failure to follow instructions may
result in property damage, bodily injury or even death.
The furnace's exhaust system works with negative combustion chamber pressure and a slightly
positive chimney pressure. Therefore, it is imperative that the air intake and exhaust system be
airtight and installed correctly. Do not install a flue damper in the exhaust vent of this unit.
Do not connect this unit to a chimney flue serving another appliance.
Contact the local building officials to obtain a permit and information on any local installation
restrictions and inspection requirements.
The word "Furnace" as used in this manual is interpreted to mean a corn or wood pellet burning
Add On Furnace. This model is not intended as the sole source of heat.
The furnace has been independently tested and listed by Warnock Hersey Laboratories in
accordance with the proposed ASTM Standards and the applicable portions of UL 1482 and
ULC S627/B366.2, and Oregon Administrative Rules 814-23-901 through 814-23- 909, stating
requirements for installation as a shop heater or Add On Furnace and for mobile home
installations. The safety-listing label is located on the inside of the removable front panel of the
unit. Please refer to label for pertinent information.
Since Even Temp Company has no control over the installation of the furnace, Even Temp
Company grants no warranty, implied or stated, for the installation of the furnace and assumes
no responsibility for any special, incidental or consequential damages.
BUILDING PERMIT
DEFINITION OF "FURNACE"
SAFETY TESTING
DISCLAIMER OF WARRANTY
MANUFACTURED BY:
Even Temp Inc
Hwy 34
Waco, NE, 68467
SCF-Revolution Manual
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents