Direct Transmission - Toshiba e-STUDIO50F Operator's Manual

Sending Documents

Direct Transmission

If your machine's memory is full or you wish to send the document(s) immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
2
3
4
5
NOTE
48
Set document(s) face down.
8
1
Enter a telephone number from the Keypad.
Ex:
5 5 5 1 2 3 4
Your machine starts dialing the telephone number.
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
TONE
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press
The display shows:
COMM. STOP?
Press
SET
9
(represented by a "/").
.
STOP
and to stop the transmission.
1
DOCUMENT SET
MEMORY XMT?
DOCUMENT SET
5551234❚
PAUSE
to