Fax Parameter Table - Toshiba e-STUDIO50F Operator's Manual

Fax Parameter Table

No. Parameter
01 CONTRAST
02 RESOLUTION
05 MEMORY
06 DIALING METHOD
07 HEADER PRINT
08 HEADER FORMAT
09 RCV'D TIME PRINT
10 KEY/BUZZER
VOLUME
12 COMM. JOURNAL
13 AUTO JOURNAL
PRINT
15 IN MODE
16 OUT MODE
18 OPERATOR CALL
TIMER
19 OGM LENGTH
(TAM I/F)
20 SILENT DETECTION
(TAM I/F)
Continued on the next page...
Setting
Setting
Number
*1 Normal Setting the home position for the CONTRAST.
2 Lighter
3 Darker
*1 Standard Setting the home position for the RESOLUTION.
2 Fine
3 S-Fine
4 Halftone
1 Off Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by
*2 On
pressing FUNCTION, 8, 9.)
1 Pulse Selecting the dialing method.
*2 Tone
*1 Inside Selecting the printing position of the header.
Inside
2 Outside
Outside : Outside TX copy area.
3 No print
No print : Header is not printed.
*1 Logo, ID No. Selecting the header format.
2 From To
*1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
2 Valid
on the bottom of each received document.
1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Loud
1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/Inc. only.
2 Always
Off
*3 Inc. only
Always
Inc. only : Prints only when communication has failed.
1 Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions.
*2 Valid
*1 Tel Selecting IN (attended) mode as either Telephone Mode or
Fax/Tel Auto Switching Mode.
2 Fax/Tel SW
*1 Fax Selecting OUT (unattended) mode as either Fax Mode or
TAM Interface Mode.
2 TAM / Fax
*1 20 sec. Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto Switching
2 30 sec.
Mode. (See page 60)
3 40 sec.
4 50 sec.
1 1 sec. Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect SILENCE
--- ---
until the time setting has lapsed.
60 60 sec.
(Default = 20 sec.)
1 Invalid Selecting the Silent Detection Mode.
*2 Valid
Customizing Your Machine
Comments
: Inside TX copy area.
: Does not print
: Always prints
35