How To Load Documents - Toshiba e-STUDIO50F Operator's Manual

How to Load Documents

1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign
objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 20 PAGES on the ADF at one time. If you have more than 20 pages, wait until transmission or storing
in memory starts as pages feed through, place any remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document on the ADF.
CORRECT
When you set a document on the ADF, the display message will change from date and time (standby) to the
following message. You can now change basic transmission settings, or begin the dialing procedure.
DOCUMENT SET
1. Transmitting documents longer than 14 in (356 mm) requires user's assistance.
NOTE
Loading Documents
Document Guides
INCORRECT
39