Toshiba e-STUDIO50F Operator's Manual page 98

Troubleshooting
Mode
Communication
No Unit Operation
98
Symptom
No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JOURNAL PRINT) is
Cannot transmit or An information code will be shown on the display. Refer to the
receive information code table to find out the trouble.
No unit operation To reset the machine, unplug the Power Cord for a few
seconds then plug it in again.
Cause / Action
set to "Valid" (default setting) and the machine is printing
the received document(s) from memory, which also
happens to be the 32nd transaction, the machine will not
auto answer until the Transaction Journal completes
printing.
page
108
108
58
101
20