Sartorius Basic Series Installation And Operating Instructions Manual page 6

6
Sartorius
Basic Series
With this Sartorius Balance, you have acquired a high-quality elec-
tronic precision weighing instrument that will help ease your daily
workload.
Please read these installation and operating instructions carefully be-
fore operating your new balance.
Pursuant to the German Directive for the Implementation of
Regulations for Prevention of Accidents "Elektrische Anlagen
und Betriebsmittel (VBG4)" [Electrical Installations and Equip-
ment] of April, 1986, it is hereby certified that the equipment
delivered, "Electronic Analytical or Precision Balance of the
Basic Series," is manufactured and tested in compliance with
the following DIN/VDE regulations
DIN IEC 348/VDE0411
Safety requirements for electronic measuring apparatus
DIN IEC 380/VDE 0806
Safety of electrically energized Office machines
DIN IEC 601/VDE 0750
Safety of medical electrical equipment
and with Article 10 of the Low-Voltage Directive 73/23/EEC
issued on February 19, 1973, by the European Community.
When you use electrical equipment in installations and under
ambient conditions requiring higher safety Standards, you must
comply with the provisions as specified in the applicable regu-
lations for installation in your country.