Chapter 5: Alerts And Troubleshooting; Device Alerts - Respironics REMstar User Manual

C 5: a
haptER
This chapter describes the device alerts and also provides troubleshooting information for issues
you may run into when using the device.
5.1 d
EviCE
The device provides two alert levels, high and medium priority.
•
High Priority – These alerts require immediate operator response. The alert signal consists
of a high priority sound, which is a continuous two-beep pattern (indicated in the following
table as: • • • •). Additionally, the backlights on the buttons will provide a high priority
flashing pattern consisting of a continuous, bright-to-off, two-flash pattern (indicated in the
following table as: ◊◊ ◊◊ ◊◊).
• Medium Priority – These alerts require prompt operator response. The alert signal consists of
a medium priority sound, which is a continuous one-beep pattern (indicated in the following
table as: • •). Additionally, the backlights on the buttons will provide a medium priority
flashing pattern consisting of a continuous, bright-to-dim, one-flash pattern (indicated in the
following table as: ◊
REM M s U
staR ERiEs sER
t
lERts and RoUblEshooting
a
lERts
◊ ◊).
M
anUal
5-1