Respironics REMstar User Manual page 17

M series
Hide thumbs Also See for REMstar:
Table of Contents

Advertisement

2. Connect the tubing to the mask:
a. If you are using a mask with a built-in exhalation port, connect the mask's connector to
the flexible tubing, as shown in Figure 3–3.
b. If you are using a mask with a separate exhalation device, connect the open end of the
flexible tubing to the exhalation device as shown in Figure 3–4. Position the exhalation
device so that the vented air is blowing away from your face. Connect the mask's connec-
tor to the exhalation device.
Warning:
Warning:
3. Attach the headgear to the mask. See the instructions that came with your headgear.
REM
M s
U
staR
ERiEs
sER
f
3–3 C
igURE
onnECting a
f
3–4 C
igURE
onnECting a
The exhalation device (e.g., Whisper Swivel II) or exhalation port (on
masks with an integrated exhalation port) is designed to exhaust CO
from the patient circuit. Do not block or seal the ports on the exhala-
tion device.
If you are using a full face mask (i.e., a mask covering both your mouth
and your nose), the mask must be equipped with a safety (entrain-
ment) valve.
M
anUal
Exhalation Port
Mask's
Connector
Flexible
Tubing
Connector
M
b
-
asK With
Uilt
in
Exhalation
Device
Flexible
Tubing
Connector
M
s
asK With a
EpaRatE
E
p
xhalation
oRt
E
d
xhalation
EviCE
2
3-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents