Respironics REMstar User Manual page 25

4.3.1.2
Figure 4–5 shows how to navigate the Patient Setup screens.
The Patient Setup screens are described below.
– FOSQ
Setup
REM M s U
staR ERiEs sER
6. Compliance VIC (Visual Inspection Check) Screen
This screen displays the 30-day compliance start date, the number
of days for which at least 4 hours of therapy was recorded, and a
number used by your home care provider to validate that the data
provided by you is the data taken from the Compliance VIC screen.
Note: This screen is only for reference. Your home care
provider may periodically ask you for this information.
v M
iEWing and odifying
Press
Auto Off
Feature: ON
f 4–5 n
igURE
1. Standby Screen
The Standby screen appears when you first apply power to the
device. You can access the Patient Setup menu from this screen by
+
pressing the + button. Once inside the Setup menu, press the
or buttons to cycle through the screens.
M
anUal
p s s
atiEnt EtUp
– FOSQ Setup +
+
Press
Altitude
1 2 3
Mask Alert
Feature: ON
p s
avigating thE atiEnt
CREEns
Press
Ramp Start Pres
4.0 cmH 2 O
s
EtUp CREEns
4-5