Respironics REMstar User Manual page 35

p
RoblEM
You are having prob-
lems connecting the
tubing to the device.
You are experiencing
excessive air leaks
where the tubing con-
nects to the device.
REM M s U
staR ERiEs sER
W i h
hy t appEnEd
You have lost the
air outlet port or are
traveling and forgot
to bring the port
with you.
The air outlet port
is not installed cor-
rectly and doesn't
seal properly.
M
anUal
W
hat to
If you are not using a humidifier, you cannot
connect your tubing to the device without the
detachable air outlet port, shown below.
You must have the port attached properly
before connecting your tubing.
Remove the port and reattach it to make sure
it's properly installed.
To remove the port:
a. Put your thumb underneath the port
and insert your index finger into the port
opening.
b. Pivoting from the bottom, unsnap the
port and pull it away from the device.
To properly reattach the port:
a. Make sure it is correctly oriented (with the
port opening at the top), and insert the
two latches at the bottom of the port into
the openings on the bottom of the device.
b. Push the top of the port down to snap it
into place.
Reattach your tubing, turn on the airflow, and
check to make sure you do not still feel air com-
ing out of the port area.
d
o
5-7