The device's display screen shows the prescribed or ramping pressure and patient data. See Chap-
ter 4 for instructions on navigating the display screens.
Figure 2–3 provides a view of the entire device control panel, with the cover door open.
2.1.1 C
ontRol
Some screens have time-out periods. The screen's timer starts when the screen is initially displayed
and is restarted whenever a button is pressed. The screen times out after one minute if there is no
activity and returns to the Standby screen.
2.2
R
EaR
Figure 2–4 shows the REMstar M Series device's rear panel (without a humidifier).
The rear panel contains the following:
•
An accessory slot for optional accessories such as the SmartCard or modem (see Chapter 6,
Accessories, for more information).
•
A filter area where each filter supplied with your device should be inserted.
•
A DC power inlet where the power cord is connected (see Chapter 3, Setup, for complete
information on supplying power to the device).
•
The air outlet port where the breathing circuit's flexible tubing is attached.
2-2
Cover Door
Previous
Screen
Button
Decrease
Button
Ramp
Button
f
2–3 d
igURE
p
i
anEl
naCtivity
p
anEl
f
igURE
Placement Area
for optional Quick
Reference Label
Next
Screen
Button
Increase
Button
Start/Stop
Button
C
p
EviCE
ontRol
anEl
2–4 R
p
EaR
anEl
REM
M s
U
M
staR
ERiEs
sER
anUal