Cisco TelePresence EX Series Getting Started Manual page 35

Cisco TelePresence Systems
GettinG started Guide
Table of contents Introduction
Remote control details
The Functions keys in
the upper part of the
remote control reflect
the softkeys on screen.
The middle part of the
remote control is used
to handle the video,
sound, phone book,
menus and navigation.
The lower part of
the remote control is
similar to the keypad of
a mobile phone.
Make sure the remote control has
working batteries (4 x AAA batteries).
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces Configuration
Function keys
Each Function key corresponds
to a softkey on the screen
and represents shortcuts and
advanced functions.
Microphone
Press the
Microphone key
to switch between
setting the
microphone to on
and to off.
Volume
Press + or – on
the Volume key to
adjust the codec
volume.
Mute
Press and hold
the – to mute an
incoming call.
Appendices Appendices
Arrow up/down
Press the up and down
arrow keys to navigate in the
menu and to move the camera
(pan, tilt) when the menu on
screen is not displayed.
Arrow left
Press the
left arrow key
to go one step
back in the menu
or to move to the
left in a text field.
Presentation
Press the
Presentation key
to show or hide a
presentation.
Zoom Phone book
Press + or – on Press the Phone
the Zoom key to Book key to
zoom the camera
display the phone
in and out. book.
35
Arrow right
Press the
right arrow key
to expand the
selected menu
item or to move
to the right in a
text field.
oK/Select
Press the OK/Select key to confirm
your choice or selection.
Layout
Press the Layout
key to display the
layout menu, then
select a view in
the menu.
Home
Press the Home key to go
back to the Home menu.
www.cisco.com