Cisco TelePresence EX Series Getting Started Manual page 18

Cisco TelePresence Systems
GettinG started Guide
Table of contents Introduction
remote control and on-screen menu
Setting the Administrator Settings menu
password
When starting up the system for the first time the
Administrator Settings menu password is not set.
NoTE: We strongly recommend that you define a password
to protect the Administrator Settings menu, since these
settings affect the behavior of the video conference system.
1. Go to Home > Settings > Administrator settings > Set
menu password.
On the remote control, press the # key to toggle
between lower or upper case characters and numbers:
abc/ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with a star (*).
3. Select Save to save the changes, or
without saving.
4. Press Home ( ) to exit.
Back to task overview
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces
Cancel to leave
Configuration Configuration Appendices
18
www.cisco.com