Cisco TelePresence EX Series Getting Started Manual page 31

Cisco TelePresence Systems
GettinG started Guide
Table of contents Introduction
How to use the Touch controller
The basic function of the Touch controller is illustrated below.
The Touch controller and its use are described in full detail in
the User Guide for your video conference system.
Call Helpdesk
Do not disturb is set here
Put the system in standby
Call someone
See the list of
scheduled meetings
Basic operating principles
Tap the touch screen to wake
up the system, if needed.
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces Configuration
All settings are not available on all products; therefore the
touch buttons shown below may or may not be present on
your system.
Control the camera
Information bar
Tap a button to
activate its function.
Appendices Appendices
Select headset, handset or speaker
Open the Settings menu, set the
local layout, and control the camera
Scroll in lists
as outlined.
31
Selfview
Mute your microphone
Change the volume
Any messages while you
were away is indicated here
Run a presentation
www.cisco.com